Duratorque is a superior suspension system that is suitable for fitment to and use on all types of trailers. Using specially formulated rubber cords as a springing medium, Duratorques are totally self-contained and easily fitted to the trailer chassis. Because the two sides are not connected, each wheel is independently sprung.

All Duratorque components are either galvanised or electro zinc plated for protection against corrosion.

From July 2011, 1000kg to 1750kg versions are fitted with a bolt in replaceable stub  axle.

Carrying capacities for duratorques are 1000kg, 1500kg, 1750kg to 2200kg in  both  two  piece  and  full  beam  types and 3000kg version in full and drop beam. These capacities are for single axle applications. When mounted in tandem the capacity must be reduced by 25% i.e. two 1500kg full beam duratorques  will  carry  2250kg. Note that duratorque half axles are each labeled with the total capacity per pair, not each  side.

All duratorques are able to be fitted with non braked or braked hubs. These brakes can be hydraulic disc, 1500kg, 1750kg, 2200kg & 3000kg capacities or Electric drum brakes in 1500kg, 1750kg & 2200kg capacities and hydraulic drum brakes in 1250kg capacity.

It is recommended  that  Duratorques  be  mounted  to  the trailer with the swing arms  trailing. When  mounted  in tandem the distance between the tyres be kept to a minimum and should not exceed 150mm. The distance between the top of the tyres and the mudguards when  the Duratorques are new and unloaded should be at least 120mm. When mounted in tandem the front axle should be braked.

When ordering full beam Duratorques remember to supply your required length measurement A,B & C as shown in the diagram below.

• The dimmensions A-B-C for Gull Wing  Axles are required as per the illustration below.
  • Please complete the attached PDF file to complete the above dimmensions and email return to us.
  • CLICK HERE for the pdf file

• The Additional Hardware for the Hubs, Drums, Disc Brakes & Calipers are NOT included.
• Options
  • 65mm or 75mm Galvanised Square Beam
  • Capacities 1500kg, 2200kg & 3000kg
  • Unbraked Hubs
  • 225mm Disc Braked Hubs - Up to 2000kg
  • 275mm Disc Braked Hubs - 3000kg (Ordered per side)
• PLEASE NOTE - there is currently an 8-10 week lead time on these builds

Each