Battery Charging Direct Current (BCDC) wiring kit to suit installations up to 25A.
The BCDC Wiring Kit allows users to connect their BCDC to the auxiliary and start batteries via a Terminal Block.
The terminal block provides a connection between the BCDC and the rest of the installation (see Figure 2.1) allowing a change in cable diameter without the need for soldering or complicated lug terminals
3 Wiring Options (select below)
- Engine Bay - Side by Side (BCDCWK-001)
Suitable for BCDC1220, BCDC1220-IGN and BCDC1225D engine bay installations where the auxiliary battery and start battery are in close proximity in the engine bay (less than 0.6 m/2' apart).
- Engine Bay - Across the Vehicle (BCDCWK-002)
Suitable for BCDC1220, BCDC1220-IGN and BCDC1225D engine bay installations where the auxiliary and start are more than 0.6 m (2') and less than 3.5 m (11') apart; typically, at opposite ends of the engine bay.
- Rear of the Vehicle (BCDCWK-003)
Suitable for BCDC1220, BCDC1220-IGN, BCDC1225D and BCDCN1225* vehicle rear installations where the auxiliary battery is up to 8.5 m (28') away from the start battery. Typically, located at the opposite end of the vehicle from the engine bay, in the tray of the ute/pickup truck or at the rear of a wagon.
Kit Includes (refer to the wiring parts diagram)
- 1x Brown, Black and Red Cables
- 1x Terminal Block with plastic cover
- 4x M5 x 25mm Socket Head Screw
- 4x M5 locking nuts
- 4x M5 Flat Washers
- 2x 150mm (6") Red Cable (shorter)
- Fuse Kit - 4x MIDI Fuses (2 Spares), 2x MIDI Fuse holders
- Cable Ties
- 2x Wago Connector and Boot
- Blue Cable (1x long cable (blue), 1x short cable (red & Bue), 2x A Mini Blase fuses
- 1m (39") Protective Conduit
Optional Accessory
- Anderson Solar Cable (sold separately) suitable for BCDC Dual Input Chargers (25A, 40A, 50A models)
Download the REDARC Wiring Kit Instructions here