Genuine Riveting kit for jockey wheel clamp fitted to Al-ko 150v and 200v euro couplings.
The kit contains
- 1 x Hexagon ( Allen key ) Screw
- 1 x Rivet nut M12
- 1 x Bushing former
How to fit the AL-KO rivet nut
- Remove the old nut Insert the new rivet nut with the short side out
- Put the bushing former on the bolt and screw the bolt into the nut with the shaped end to the nut and tighten to approx 60Nm
- The nut should now be tight
- Remove the bolt and former
Each