Elecbrakes Bluetooth electronic brake controller is revolutionising the towing process by eliminating the need for modification to your tow vehicle. Designed and assembled in Australia, this simple-to-use brake controller can be fitted to any trailer. It is controlled through Bluetooth and can be synced to any Smartphone device or the optional EB Controller mentioned below.
Elecbrakes employs a high-speed microprocessor and various sensors which continuously sample the operating parameters at over 1,000 times per second. For communication, the device uses the widely adopted Bluetooth 4.0 standard, and the hardware selections yield a Bluetooth device that has long range capability ensuring high connection reliability and no dropouts under typical operating conditions. This ensures the device can be mounted anywhere on the trailer's draw bar.
The Elecbrakes app provides the user with the ability to monitor, configure programs and control brake response from the tow vehicle.
Elecbrakes is normally powered via the tail lights, however a second prefered Auxillary Power Input from the battery is also provided if the user has a prime towing vehicle. The system has been designed to continue operating even if the Bluetooth signal is interrupted or lost.
Housed in a tough fibre reinforced housing and encased in urethane, ensuring the electronics are fully protected from water, dust and vibration.
Configured To Your Trailer - The Elecbrakes system stores settings and programs on your trailer for easy access by any operator.
Tow with any vehicle - Monitor, change settings and control the trailers brakes from the tow vehicle.
Optional In-Car WIFI Controller - Elecbrakes can also be operated using the specially designed remote-control unit. Connecting by the best in Bluetooth 4 technology, the remote provides a multi-faceted in-car controller. With a friendly interface the operator can apply the manual override, and, via the plus and minus buttons, increase and decrease brake response instantly on the trailers brakes.
Precise Adjustments - Use numeric values for brake response settings ensuring the ideal response can be dialled in quickly.
Warranty - 2 years from the date of purchase
Information Link and FAQ - Video & Brouchure here
Users Installation Manual Here
If NIL Stock, then these will be supplied to order, one week delivery out of Sydney
Optional Connections - You will also need to purchase a seperate connection Leader Cable or Adapter Plug listed below
Tekonsha Brake Controller - Primus IQ
Trojan Trailer Cable - 7 Core Per Metre
CM Keel Rollers - Stainless Steel Roller Pins
CM Keel Rollers - Flat Rubber
Elecbrake - Plug & Play Adapter Plugs - 7 Pin Male/12 Pin Female
Elecbrake - Plug & Play Adapter Plugs - Leader Cable
Narva Trailer Plug - 7 Pin Flat Male Plug
NARVA Tail Lamp - 86030 Combo
Narva Trailer Cable - 5 Core